张直中. 双基地合成孔径雷达[J]. 现代雷达, 2005, 27(1): 1-6.Zhang Zhi-zhong. Bistatic synthetic aperture radar[J].Modern Radar, 2005, 27(1): 1-6.[2]Stockburger E F and Held D N. Interferometric movingground target imaging[C]. IEEE International RadarConference, Alexandria, VA, 1995: 438-443.[3]Gabele M and Sikaneta I. A new method to create a virtualthird antenna from a two-channel SAR-GMTI system[C].International Waveform Diversity Design Conference, Pisa,2007: 433-437.[4]Delphine C M, Klare J, and Andreas R B, et al.. Wide-areatraffic monitoring with the SAR/GMTI system PAMIR[J].IEEE Transactions on Geoscience and Remote Sensing.2008,46(10):3019-3030[5]孙华东, 宿富林, 高建军等. 基于DPCA-FrFT 算法的SAR运动目标参数估计[J]. 吉林大学学报(工学版), 2008, 38(2):476-482.Sun Hua-dong, Su Fu-lin, and Gao Jian-jun, et al.. Parameterestimation of SAR moving target based on DPCA-FrFTalgorithm[J]. Journal of Jilin University (Enginerring andTechnology Edition), 2008, 38(2): 476-482.[6]Shen Chiu. Application of fractional fourier transform tomoving target indication via along-track interferometry[J].EURASIP Journal on Applied Signal Processing, 2005, 20:3293-3303.[7]Sun Hong-bo, Liu Guo-sui, Gu Hong, and Su Wei min.Application of fractional fourier transform to moving targetdetection in airborne SAR[J], IEEE Transactions onAerospace and Electronic Systems, 2002, 38(4): 1416-1424.[8]李景文. 合成孔径雷达动目标检测与成像[D]. [博士论文], 北京: 北京航空航天大学, 1999, 09.Li Jing-wen. Synthetic aperture radar moving targetdetection and imaging[D]. [Ph.D. dissertation], Beijing:Beijing University of Aeronautics and Astronautics, 1999, 09.[9]孙娜, 周荫清, 李景文. 基于DPCA 技术的星载SAR/GMTI处理方法[J].电子与信息学报.2005, 27(10):1564-1568浏览[10]Li Gang, Xu Jia, Peng Ying-ning, and Xia Xiang-gen.Bistatic linear antenna array SAR for moving targetdetection, location, and imaging with two passive airborneradars[J].IEEE Transactions on Geoscience and RemoteSensing.2007, 45(3):554-565[11]保铮, 邢孟道, 王彤. 雷达成像技术[M]. 北京: 电子工业出版社, 2005: 318-319.Bao Zheng, Xing Meng-dao, and Wang Tong. Radar ImagingTechniques[M]. Beijing: Publishing House of ElectronicsIndustry, 2005: 318-319.
|