Coons曲面结合B样条拟合大型面天线变形反射面

王从思; 段宝岩; 仇原鹰

doi:10.3724/SP.J.1146.2006.00865

Coons曲面结合B样条拟合大型面天线变形反射面

doi: 10.3724/SP.J.1146.2006.00865

基金项目:

国家自然科学基金(50475171)和国家部级基金资助课题

计量
- 文章访问数: 2905
- HTML全文浏览量: 64
- PDF下载量: 716
- 被引次数: 0
出版历程
- 收稿日期: 2006-06-19
- 修回日期: 2007-02-16
- 刊出日期: 2008-01-19

On New Fitting Method of Large Distorted Antenna Reflectors Based on Coons Surface and B-Spline

摘要

摘要: 为了精确反映变形反射面实际形状，该文提出了一种新的分块拟合方法。该方法首先对变形反射面进行分环分块划分，再对每个块域分别进行Coons曲面拟合，并采用周向三次与径向二次B样条曲线来确定块域的边界条件，进而得到准确的反射面变形整体和局部信息。通过对不同情况下某16m天线的机电性能综合分析，证明了此方法是准确、有效的。
- 变形面天线;分块拟合;Coons曲面; B样条曲线;增益损失
Abstract: A noval Divided-Fitting Method based on Coons surface and B-spline (DFMB) to fit the distorted antenna affected by different loads is presented for accurately describing the real deformation of antenna surface. It firstly divides the distorted reflector into many individual zones, uses the Coons surface to fit each zone, and determines the boundary of each zone by third-order hoop and second-order radial B-spline curves. Then the precise local and total information of distorted reflector can be obtained to compute the electrical performances of antenna. The good electromechanical simulation results of the application to a 16-m parabolic antenna proved the validity of developed method.

HTML全文

参考文献(1)

7]章日荣. 反射面天线及波纹喇叭. 北京: 人民邮电出版社, 1977: 73-115.[8]Duan B Y, Qi Y H, and Xu G H, et al.. Study on optimization[9]of mechanical and electronic synthesis for the antenna structural system. Int J Mechatronics, 1994, 4(6): 553-564.[10]面天线虚拟制造项目组. 用户访谈报告. 西安电子科技大学, 2002.[11]苏步青. 实用微分几何引论. 北京:科学出版社,1998: 243-275.[12]Levy R. Structural Engineering of Microwave Antennas for Electrical, Mechanical and Civil Engineers. New York: IEEE Press, 1996, CH3. [12] Wang C S, Duan B Y, and Qiu Y Y, et al.. A new approach to fit the distorted reflector antenna and its computation of electrical characteristics. The First Asia International Symposium on Mechatronics (AISM2004), Xian, China, 27-30 Sept. 2004: 201-205.[13]孙家广. 计算机图形学. 北京: 清华大学出版社, 2003: 286-350.[14]Paynter G F, Burnside W D, and Lee T H. A systematic approach to design and analysis of antennas on complex platforms[J].IEEE Antennas and Propagation Magazine.2001, 43(6):38-44[15]Kim J W, Kim B S, and Lee C W. Computation of the average power pattern of a reflector antenna with random surface errors and misalignment errors[J].IEEE Trans. on Antennas Propagat.1996, 44(7):996-999[16]王从思,段宝岩,仇原鹰. 天线表面误差的精确计算方法及电性能分析[J].电波科学学报.2006, 21(3):403-409Wang Cong-si, Duan Bao-yan, and Qiu Yuan-ying. Precise algorithm for surface errors of reflector antennas and analysis of its electrical performance. Chinese Journal of Radio Science, 2006, 21(3): 403-409..

Alpatova A V, Gorin A M, and Kadkalo I N. Calculation of non-axisymmetrical parabolic reflector antennas. The 4th International Conference on Antenna Theory and Techniques, Kharkiv, Ukrainian, 9-12 Sept., 2003, vol.1: 248-250.[2]Sinton S and Rahmat-Samii Y. Random surface error effects on offset cylindrical reflector antennas[J].IEEE Trans. on Antennas Propagat.2003, 51(6):1331-1337[3]Imbriale W A. Distortion compensation techniques for large reflector antennas. 2001 IEEE Conference on Aerospace, Big Sky, Montana, USA, 10-17 Mar., 2001, vol.2: 799-805.[4]Ruze J. The effect of aperture errors on the antenna radiation pattern[J].Suppl. al Nuovo Cimento.1952, 9(3):364-380[5]叶尚辉. 天线结构设计. 北京:国防工业出版社,1980: 201-227.[6]华慕麟. 天线变形曲面的一种拟合方法[J].现代雷达.1994, 16(1):75-82Hua Mu-lin. A best-fit method for deformed surface of antennas. Modern Radar, 1994, 16(1): 75-82. .

施引文献

资源附件(0)

访问统计