基于相位差分方法的BPSK引信信号m序列识别
doi: 10.3724/SP.J.1146.2005.00706
Identification of m-Sequence for BPSK Fuse Signal Based on Phase-Difference Method
-
摘要: 该文根据二相移相键控(BPSK)引信信号脉冲相位差分和m序列的一一对应关系,通过求解脉冲相位差分方程组来得到m序列。首先,通过FFT求得脉冲相位,然后分别采用了一阶相位差分方法和二阶相位差分方法来对m序列进行识别。经计算机仿真验证,该方法是完全正确的。最后对该方法进行了可靠性分析,分析表明,即使某一个码元由于对应的脉冲相位测量误差很大而被错误识别,也不会对后续的PN码识别产生影响,说明该方法具有很高的可靠性。Abstract: According to one-to-one relationship of the Binary-Phase-Shift-Keying (BPSK) fuse signals pulse-phase difference and the m-sequence, the m-sequence can be obtained by solving the phase-difference equations. First, the pulse phase is measured by FFT. Then, first-order phase difference method and second-order phase difference method separately are applied to identify the m-sequence. The computer simulation proves the method to be completely correct. Finally, the reliability of the method is analyzed to find that, even if any Pseudo Noise (PN) code is mistakenly identified because of large measuring error of the corresponding pulse phase, it has no influence on identification of the later codes. This indicates that the method has high reliability.
-
[1] 刘己斌, 刘顺利, 赵惠昌. 用投影滤波滤除伪码体制引信中的AM-FM干扰[J].电子与信息学报.2005, 27(3):434-437浏览 [2] 詹亚锋, 曹志刚, 马正新. DSSS信号扩频序列估计[J].电子与信息学报.2005, 27(2):169-172浏览 [3] 肖国镇等. 伪随机序列及其应用[M]. 北京: 国防工业出版社, 1985: 76-77. [4] 沈允春. 扩谱技术[M]. 北京: 国防工业出版社, 1995: 34-35. [5] James Tsui. Digital Techniques for Wideband Receivers(Second Edition)[M]. U.S.A: Artech House, Inc., 2001: 5-10. [6] 王世一. 数字信号处理[M]. 北京: 北京理工大学出版社, 1997: 98-102. [7] 杨莘元, 郝敬涛, 刘一等. 运用辅助序列的快速变步长PN码捕获的新算法[J]. 兵工学报, 2005, 26(2): 196-200. Yang Xin-yuan, Hao Jing-tao, and Li Yi, et al.. Study on new rapid step-changed coherent acquistion algorithm for PN sequence using an auxiliary sequence. Acta Armamentarii, 2005, 26(2): 196-200.
计量
- 文章访问数: 3315
- HTML全文浏览量: 112
- PDF下载量: 971
- 被引次数: 0