The Coupling Technique for ICs Centering Design and Tolerance Optimization

Jing Ming-e; Hao Yue; Ma Pei-jun

Volume 27 Issue 1

Jan. 2005

Turn off MathJax

Article Contents

Article Navigation > Journal of Electronics & Information Technology > 2005 > 27(1): 139-142

Jing Ming-e, Hao Yue, Ma Pei-jun . The Coupling Technique for ICs Centering Design and Tolerance Optimization[J]. Journal of Electronics & Information Technology, 2005, 27(1): 139-142.

Citation:

Jing Ming-e, Hao Yue, Ma Pei-jun . The Coupling Technique for ICs Centering Design and Tolerance Optimization[J]. Journal of Electronics & Information Technology, 2005, 27(1): 139-142.

Jing Ming-e, Hao Yue, Ma Pei-jun . The Coupling Technique for ICs Centering Design and Tolerance Optimization[J]. Journal of Electronics & Information Technology, 2005, 27(1): 139-142.

Citation:

Jing Ming-e, Hao Yue, Ma Pei-jun . The Coupling Technique for ICs Centering Design and Tolerance Optimization[J]. Journal of Electronics & Information Technology, 2005, 27(1): 139-142.

PDF( 901 KB)

The Coupling Technique for ICs Centering Design and Tolerance Optimization

Received Date: 2003-07-25
Rev Recd Date: 2003-12-29
Publish Date: 2005-01-19

Abstract

Abstract

A coupling technique is proposed based on parametric yields centering design and tolerance optimization. The technique is convergence to the optimal normal values from given initial design variable and tolerance with little knowledge of circuit, device or technology. In the optimal value, the maximum yield can be obtained according to technology condition while proper technology conditions can be chosen according to practical requirements. Finally, the feasibility and utility of the method are demonstrated satisfactorily by numerical and practical examples.

FullText(HTML)

References(1)

References

Soin R S, Spence R. Statistical exploration approach to design centering. IEE Proc. -G, 1980, 127(6): 260- 269.[2]郝跃.集成电路制造动力学理论与方法.高科技教育丛书,北京:教育出版社等联合出版,1995:284-291.[3]Say Wei Foo, Yu Lin. Hybrid method of tolerance design[J].Proceedings of ICECS99, The 6th IEEE International Conference on Electronics, Circuits and Systems.1999, 1:557-[4]Bandler J W. Optimization of design tolerance using nonlinear programming[J].Journal of optimization and application.1974,14(1):99-[5]凌燮亭.电路参数的容差分析与设计.上海:复旦大学出版社,1991:100-177.[6]甘学温,杜刚,肖志光.实验设计与模拟相结合用于IC优化设计的TCAD工具.北京大学学报(自然科学版),2002,38(5):713-717.[7]鲁勇,张文俊,杨之廉.响应表面法在工艺综合中的应用.半导体学报,2002,23(10):1106-1120.[8]Abdel-Malek H L, Hassan A-K S O. The ellipsoidal technique for design centering and region approximation. IEEE Trans. on CAD/AC, 1991, 11(8): 1006- 1014.

Relative Articles

Supplements(0)

Cited By

Proportional views