A NEW ALGORITHM FOR SYMBOL TIMING RECOVERY USING BAUDRATE SAMPLING

Mueller K H, Muller M. Timing recovery in digital synchronous data receivers. IEEE Trans. on[2]COM, 1976, COM-24(5): 516-531.[3]Jennings A, Clarke B R. Data-sequence selective timing recovery for PAM systems. IEEE Trans. on COM, 1985, COM-33(7): 729-731.[4]Armstrong J. Symbol synchronization using baud-rate sampling and data sequence dependent signal processing. IEEE Trans. on COM, 1991, COM-39(1): 127-132.[5]Tzeng C-P J, Hodges D A, Messerschmitt D G. Timing recovery in digital subscriber loops using baudrate sampling. IEEE J.of SAC, 1986, SAC-4(11): 1302-1311.[6]Farhang-Boroujeny B. Near optimum timing recovery for digitally implemented data receivers. IEEE Trans. on COM, 1990, COM-38(9): 1333-1336.[7]Oerder M, Mery H. Digital filter and square timing recovery. IEEE Trans. on COM, 1988, COM-36(5): 605-612.[8]Gardner F M. A BPSK/QPSK timing-error detector for sampled receivers. IEEE Trans. on COM, 1986, COM-34(5): 423-429.[9]Ascheid G, Oerder M, Stahl J, Meyr H. An all digital receiver architecture for bandwith efficient transmission at high data rates. IEEE Trans. on COM, 1989, COM-37(8): 804-813.[10]Sabel L P, Cowley W G. Block processing feedforward symbol timing estimator for digital modems. Electron. Lett., 1994, 30(16), 1273-1274.[11]Brandao A L, Lopes L B, McLernon D C. Method for timing recovery in presence of multipath delay and cochannel interference[J].Electron. Lett.1994, 30(13):1028-1029