The Signal Integrity Analysis of Electromagnetic Band-Gap Structure

Joo S H, Kim D Y, and Lee H Y. S-bridged inductive electromagnetic bandgap power plane for suppression of ground bounce noise. IEEE Microwave and Wireless Components Letters, 2007, 17(10): 487-489.[2]Shahparnia S and Ramahi M O. Electromagnetic interference (EMI) reduction from printed circuit boards (PCB) using Electromagnetic bandgap structures[J].IEEE Transactions on Electromagnetic Compatibility.2004, 46(4):580-586[3]Sabbagh M A E and Mansour R R. Ultra-wide suppression band of surface waves using periodic microstrip-based structures[J].IEEE Transactions on Microwave Theory and Techniques.2008, 56(3):671-683[4]Abhari R and Eleftheriades G V. Metallo-dielectric electromagnetic bandgap structures for suppression and isolation of the parallel-plate noise in high-speed circuit[J].IEEE Transactions on Microwave Theory and Techniques.2003, 51(6):1629-1639[5]Kim K H and Schutt A J E. Analysis and modeling of hybrid plannar-type electromagnetic-bandgap structures and feasibility study on power distribution network application[J].IEEE Transactions on Microwave Theory and Techniques.2008, 56(1):178-186[6]Park J, Lu A C W, Chua K M, Wai L L, Lee J, and Kim J. Double-stacked EBG structure for wideband suppression of simultaneous switching noise in LTCC-based SiP application[J].IEEE Microwave and Wireless Components Letter.2006, 16(9):481-483[7]Sievenpiper D, Zhang L, Broas R F J, Alexopolous N G A, and Yablonovitch E. High-impedance electromagnetic surfaces with a forbidden frequency band[J].IEEE Transactions on Microwave Theory and Techniques.1999, 47(11):2059-2073[8]Qin J O, Ramahi M, and Granatstein V. Novel planar electromagnetic bandgap structures for mitigation of switching noise and EMI reduction in high-speed circuits[J].IEEE Transactions on Electromagnetic Compatibility.2007, 49(3):661-669[9]Wu T L, Lin Y Y, Wang C C, and Chen S T. Electromagnetic bandgap power/ground planes for wideband suppression of ground bounce noise and radiated emission in high-speed circuits[J].IEEE Transactions on Microwave Theory and Techniques.2005, 53(9):2935-2942[10]Shih C H, Shiue G H, Wu T L, and Wu R B. The effects on SI and EMI for differential coupled microstrip lines over LPC-EBG power/ground planes. 2008 Asia-Pacific Symposium on Electromagnetic Compatibility, Singapore, May, 2008: 164-167.